Goodrich SUGAR & CHEMICAL COMPLEX LIMITED
OFFERS
LAMINATE FLOORING PRODUCTION LINES
FROM CHINA / EUROPE

Horizontal Impregnating & drying Production line for laminate flooring

  

Short Cycle Press for Laminate Flooring


Transversal double-end tenoner

  

Longitudinal double-end tenoner


Laminate Flooring Production Line

INTRODUCTION -

The Intensified wood flooring refers to the derived wood material with a sandwich structure, which contains the following layers-

  1. Abrasive resistant layer
  2. Decorative layer
  3. Basic material layer
  4. Balance layer

The abrasive-resistant layer is the top transparent cover with high value of abrasion. The decorative layer is grain layer,which is visible from the top. This layer has the printed paper, which is coated with melamine solution & has the features of water-proof, humidity-proof, UV resistance and fire-resistance.

The basic material in the middle layer is formed through the reform of fibres under high-temperature and pressure, after the wood material is shattered. This layer of board is called High Density Fibre Board, which has strong flexibility and durability. The balance layer is the back cover.It is a high-molecular resin material glued to basic material and has the function of stabiliy and resisting the humidity.

The multi-layer compound flooring is processed under high precision by advanced technology and with a motto of protecting global environment and saving forest reserves.It has the same walking comfort and decoration effect, but more stable when compared to solid wood flooring.

The laminate flooring has been tested for time to counter the problems caused by weather and environment such as cracking, contracting & expanding and effectively resisting the exterior effects and weather changes. The laminate flooring comes with luxury, nobility and fashion.It can be quickly put together and used immediately after installation.

Goodrich offers Automatic Laminate flooring production line, which consists of the following machines-

  1. Feeding rollers
  2. Longitudinal
  3. Transtitional feeding rollers
  4. Transversal tenoner

All the cutter motors equipped on two tenoners are high speed motors (frequency converter) and the cutter spindles can be turned to meet different types of locks for flooring. The width is adjustable for tenoners through ball-screw & guide-rail, which ensures high precision & steady production.

Optional Facilities -

Single stage Horizontal Impregnating & drying Production line- It is an optional facility to continuously impregnate, dry & cut decoration paper for overlaying on High Density Fibre Board, which is the basic material for laminate flooring.

II Short cycle lamination production line- This is also an optional facility, which is used to decorate the top of laminate flooring with melamine impregnated paper.

Single stage Horizontal Impregnating & drying Production line- For Coating on the decorative paper, melamine-formaldehyde resins are prepared for direct overlaying on MDF/HDF during a short-cycle pressing process. The resin could be also urea-formaldehyde resin for the overlaying paper on top of melamine coated paper. Following are the resin & paper data-

Paper -

- Decorative paper - 40 -140 g/m2

- Overlay paper - 25 - 50 g/m2

- Backing / underlay paper - 110 -140 g/m2

Resin-

- Urea -formaldehyde resin (clear resin)

- Melamine-formaldehyde resin - for coating

Solvent - water

- Solid content of resin solution - 40-60%

- Resin pick up on the base paper weight

- Decorative paper - 50 - 150 %

- overlay - 180 - 300%

- Resin content of impregnated paper

- Decorative paper - 33 - 60 %

- overlay-64 - 75%

Main Technical data

Available width:

960 ~ 1400 mm

Working level:

1200mm(from ground to the working plane)

Raw paper:

Decorative paper and backing for impregnation

Specific weight:

38 ~ 140 g/m2

Impregnating medium:

Melamine resin, modified resin etc.

Volatile:

6 ~ 8 %

Mechanical speed:

5 ~ 40 m/min

Running Speed:

5 ~ 20 m/min (according to different raw paper and resin pickup)

Drying Temperature:

70 ~ 160 0C

Total Power:

~ 60 KW

Heating medium:

Steam or thermal oil

Heat Consumption:

0.5 MW(50 x 104kcal/h)

Compressed air consumption:

0.6 Mpa 6m3/h

Total net weight:

~ 42000 kg

Note: If specific weight of raw paper is of 80 ~ 90g/m2 and its resin pick-up is 130~140%,then the daily output can be over 10,000 sheets.

 

Equipment list

1) Unwinder - 1 unit

2) Splicer - 1 unit

3) Impregnating machine - 1 unit

4) Air flotation dryer - 4 units

5) Cooling device - 1 unit

6) Web Aligner - 1 unit

7) Pulling machine - 1 unit

8) Slitter - 1 unit

9) Belt conveyor - 1 unit

10) Blower - 1 unit

11) Lifting plate - 1 unit

12) Electric system - 1 set

II Short cycle lamination production line- Short cycle lamination production line is used in overlaying the panels. It is especially popular with low pressure melamine impregnated paper.

This line consists of the following items-

No.

Description

 

Quantity

1

single-opening press

1

2

quick loader & un-loader

1

3

stacking conveyer

1

4

board pusher

1

5

hydraulic lifting table

1

6

brushing machine

1

7

roller conveyer

1

8

edge trimming machine

1

9

belt conveyer1

1

10

vacuum board-turner

1

11

belt conveyer2

1

12

centering conveyer

1

13

vacuum sucker

1

14

electric control system

1

Following are the specifications of short cycle laminating press-

Board type

Particle-board and medium density impregnating paper lamination

Board size

(6~40)12202440

mm

Productive capacity

1,250,000 m2/a

Heat consumption

250,000 kcal/h

Compressed air consumption

0.6MPa 20 Nm3/h

Cooling water consumption

20? 10m3/h

Electric power

70kW(380V ?50HZ)

Dimensions

4200043905910mm

Producing cycle

45s (according to the process)

Auxiliary time

=12s

Carrier reciprocating precision

0.5mm

III Floor forming line- Longitudinal & cross double-end tenoner is the standard equipment for mortising the two ends of laminate flooring. The machine has 8 shafts which can rotate at the angle of 3600C to meet the needs of clip type flooring. Double chain rails feed the sheets with high speed precision and the capacity of the flooring line is 1,500,000 m2/year. In the process of feeding, floor & chain rail will be on synchronous run so that there is no scratch on the board surface, nor the problem of table wearing.

Following are the main machines for Floor forming-

No.

Name

 

Quantity

1

Panel saw

4

2

Longitudinal double-end tenoner

1

3

Cross double-end tenoner

1

4

Fore feeding machine

1

5

Mid feeding machine

1

6

Automatic board-turner

1

7

Film coating machine

1

8

Thermal sealing machine

1

9

Cooling conveyer

1

10

Positioning table

1

11

Hollow press

1

12

De-dusting system(optional)

1

Following are the specifications of Flooring production line-

 

SPECIFICATIONS

 

UNIT

 

Longitudinal

double-end

tenoner

 

 

Cross

double-end

tenoner

1.

Processing length:

mm

400~

400~1500

2.

Processing width:

mm

185~600

30~350

3.

Processing thickness:

mm

6~25

6~25

4.

Speed of feeding:

m/min

10~60

10~30

5.

Turning speed of one to four shafts:

rpm

7000~9000

7000~9000

7.

Moter power

Milling shaft:

kw

5.5 x 8

5.5 x 8

Feeding:

kw

7.5

4.0

Width adjusting:

kw

---

2.2

8.

Weight:

kg

11000

10000

9.

Cutting tool:

mm

f250f40

f250f40

For more details, please contact

Goodrich Sugar & Chemical Complex Limited

No. 16, 2nd Main, 2nd Cross,

AECS Layout 3rd Stage,

Sanjaynagar, Bangalore 560 094,

Karnataka, India.
Ph: 0091 - 80 23411400

Fax: 0091 - 80 23410388

Email: rao@goodrichsugar.com

Website: www.goodrichsugar.com

  


BACK
2006 GoodRich Sugar 
This site is best viewed in Internet Explorer 4.0+ at 800 X 600 resolution